Table of Contents
Advertisement
UK
27-05-2013
F r o n t – L i f t 1 5 . 0 1
4.5 Maintenance
Retighten all bolts after the first 10 hours of operation. Check cylinders, hoses and fittings on leaks
and retighten.
Then check that the Front-Lift bolts are tightened and that the hydraulic system does not leak oil.
In case of a standstill of some duration the Front-Lift should be lifted to protect the piston rods. If
this is not possible (if a tool has been mounted), the protruding part of the piston rods should be
lubricated in grease.
4.6 Locking Pin for Lift Arms
By fitting the locking pin in various ways, the movability of the arms can be determined. On page 9
the various possibilities are shown.
8
Advertisement
Table of Contents
