Table of Contents
Advertisement
UK
Disc
SAT system:
Hydraulic adjustable weight transfer system, ensuring equal weight transfer in the total working width,
resulting in the fact that the wing sections are following the ground.
Manometer for pressure adjustment on 2-sections machines
During work, the hydraulic pressure will vary according to the ground surface. The pre-set hydraulic
pressure in the working position must be 50 – 70 bar.
Disc-Roller XL Contour 4.5 – 5.5m
The Discs are adjusted up or down by a hydraulic
Master-Slave system.
It is important that the discs are regularly lifted
to the top
to reset the Master-Slave system. The depth position
is readable on the scale (standard).
The sensor can be adjusted, where el. depth stop is
mounted. (additional equipment) It is possible to
over steer the electrical system by turning off the
switch mounted in the cabin, now the discs can pass
the sensor, thereby a deeper
working depth is achieved e.g. at
headland and tramlines.
12
01-06-2023
Back to table of content
Advertisement
Table of Contents
