Maintenance And Service; Lubrication - HE-VA Combi-Disc 4,5 m Operating Instructions Manual

Important:
After 10 hours of operation, retighten wheels, bearings and stop rings. Check hydraulic hoses,
fittings and cylinders for leaks and retighten.
Check regularly that all bolts are tightened properly.
After end season, grease and wash machine, and grease the piston rods.

Lubrication

When greasing, maintaining and repair work, the machine must be lowered, the tractors brakes
activated and engine stopped
Tiller part:
There are 20 greasing nipples at the Combi-Tiller part, which has to be greased after every 15 hours
of operating and after washing the maschine. Greasing spots are located at the lift linkage, at all
hydraulic cylinders and at the wing sections bushings for hinges
There is 1 grease nipple at each support wheel in the hinges. The spindle in to adjust the support
wheel must be dismantled at least once a year to be greased (figure1).
There is 1 grease nipple at every hinge on the drawbar (figure 2).
On machines with hydraulic stone protection there are 2 grease nipples at each tine, which must be
greased every 10 hours operation (figure 3 og 4).
On the lift linkage her are 2 grease nipples at each arm (figure 3).
There are 2 grease nipples at each lift and folding cylinder (figure 5).
There are 3 grease nipples at each wing hinge (figure 6).
Disc-Roller part:
On the 4,5 meter Disc-Roller part there are 25 grease nipples and the 5,5 meter model there are 31
nipples.
There are 2 grease nipples at every hydraulic cylinder, except the 2 cylinders to adjust the depth of
the discs, which only have a nipple on the bushing (figure 7 and 8).
There is 1 grease nipple at each hinge on the wings, 4 pc. Total (figure 7).
There is 1 grease nipple at the transport wheel frame hinge (figure 9).
There is 1 grease nippæe at each roller bearing, which only have to be greased once or twice in
every season (figure 10).
Combi-Disc 4,5 – 5,5m Part 1
UK

Maintenance and service

Oil, type Hydro Texaco HD 32 has been
filled in the hydraulic system.
17
20-01-2021
Back to the table of contents