Responsibility of the user ..........................6 Safety instructions for Weeder ........................6 Starting up ..............................7 Introduction ..............................7 Assembling / attaching the HE-VA Weeder ....................7 Starting ............................... 7 Spare Parts List ............................10 Weeder 3,0 and 6,0 m..........................10 Weeder 4,5 and 7,5 m.
Weeder/Weeder HD 13-05-2013 DS/EN 45 014 Declaration of Conformity HE-VA ApS N. A. Christensensvej 34, DK-7900 Nykøbing Mors declares under sole responsibility that the product: Weeder No. : _____________ to which this declaration relates, is in conformity with the provisions of 98/37/EF (Machinery) directive with later amendments.
However, for hard and clayish soil a Ø7 mm x 450 mm double tine is available. Weeder HD is as standard mounted with Ø7 x 600 mm double tines or Ø9 x 600 mm double tines.
Responsibility of the user The user is responsible that the operator has the needed competence. Since HE-VA cannot control the use of the harrow, we can only guarantee the quality of the machine, and cannot accept any kind of claims for compensation in connection with the work of the machine.
Starting up Introduction The following is a brief guide to the assembly and use of your Weeder. The Weeder is specially constructed for weeding in cereals, beans, corn, potatoes etc. And also for easy tillage work on ploughed land and for treatment of grassfields.
Page 8
Weeder/Weeder HD 13-05-2013 Angle. The angle of the weeder tines is adjusted by means of Fig. 3 the handle on the harrow frame. Heavy soil requires aggressive adjustment of the tines. The harrow frames has to be horizontal.
Page 9
Weeder/Weeder HD 13-05-2013 Fig. 6 The support wheels have to be adjusted, so that the harrow frames are horizontal during work. Remember to lock the spindle. Fig. 7 Adjustment of the tines (angle). Fig. 8 The tines are easily dismounted/mounted by...
Weeder/Weeder HD 13-05-2013 Weeder 12,0 m. side frame...
Page 19
Weeder/Weeder HD 13-05-2013 Pos. Part No. Description Number 1101170 Inner side frame, left 1101180 Inner side frame, right 1101360 Outer side frame, left 1101370 Outer side frame, right 1101700 Spike Ø35x365mm. 0371700 Retaining pin Ø8x50mm. 0432100 Lubricator nipple M6 0236110 Hexagon bolt M20x50mm.
Page 23
Weeder/Weeder HD 13-05-2013 Part No. Description 12,0 1100240 Tilt link 1100780 Tilt link 1100790 Tilt link 1100800 Tilt link 1100810 Tilt link 1100820 Tilt link...