Table of Contents
Advertisement
UK
After 10 hours of operation, tightening of wheels, bearings and stop rings must be done. If
this is not respected our warranty will lapse.
Metric thread
M10x1,5
M12x1,75
M14x2,0
M16x2,0
M18x2,5
M20x2,5
M22x2,5
M24x3,0
Hub bolts M18x1,5 fine thread
Hub bolts M22x1,5 fine thread
Eventually damages at the paint must be repaired at least once in the season. This will
preserve and make the machine stay in a good condition for many years.
• On foldable models the cylinder bushings and hinge joints must be greased at every 20 hour
of operating
• Bearings at the rollers twice a year and after every machine wash.
When, after many years of use, the machine is to be regarded as end-of-life, it must be disposed of
to a registered and approved product dealer. This will carry out the statutory discharge and disposal
of hydraulic oil, as well as sorting materials for further processing for recycling.
Top-Cutter 3,0 - 3,5 - 4,0 - 5,0 - 6,0m
Maintenance
Maximum torque in Nm. w/lubricated thread
Quality 8.8
47
81
128
197
275
385
518
665
Disposal
9
rigid/hydraulic
Quality 10.9
65
114
181
277
386
541
728
935
433 Nm
803 Nm
Back to the table of contents
01-04-2021
Quality 12.9
79
136
217
333
463
649
874
1120
Advertisement
Table of Contents
