EC DECLARATION OF CONFORMITY in accordance with the EU Machinery Directive 2006/42/EC applicable as from December 29 2009: HE-VA ApS N. A. Christensensvej 34, DK-7900 Nykøbing Mors The declaration comprises the following machines: Vip–Roller NG 4,5m – 5,4m – 6,3m – 7,3m – 8,2m Nykøbing the 29th of December 2018...
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 1. Description of the machine The Vip-Roller is a 3-sectioned hydraulic, wheel mounted roller. Vip-Roller is to be used for packing the top soil, to maintain the content of moisture in it, and to eliminate not solid stones from the surface of the cultivated area.
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 3. Specifications 3-section hydraulic wheel-mounted field roller with free movability in all sections. Used for rolling of stones and packing of the top soil. The roller is available with a working width of 5.4 m or 6.3 m and with three different ring types: Cambridge-, Cam-, Star-, 2D wave-, and Crosskill rings.
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 4. Operating Instructions Attachment On delivery, the roller is in transport position. When the roller is attached, check that the towing hook height is 400-500 mm. Reverse the tractor, put in and secure the draw bolt. Raise the support leg and place it in the transport fittings on top of the drawbar.
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 5. Safety at the Vip-Roller NG Do not operate the machine, if any people** are at risk in the dangerous area.* When persons are at risk in the dangerous area (e.g. when doing adjustments, maintenance or connect or disconnecting), the following points must be met: Lower the machine on solid ground.
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 6. Safety Instructions, regarding Hydraulic System 1. The highest allowable pressure, is 225 bar. 2. It is recommended to mark the hydraulic connections between the implement and tractor, to avoid incorrect operation! 3.
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 7. Markings on the machine Several markings are located at your machine, which contains safety regulations and other instructions to inform about correct operating. Please read these instructions carefully, and make the driver aware about the markings and safety regulations in this Operating Instructions.
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 8. Maintenance • After 10 hours of operation, tightening of wheels, bearings and stop rings must be done. • Hoses, fittings and cylinders must be checked for any leaks and retightened. •...
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 9. Disposal When, after many years of use, the machine is to be regarded as end-of-life, it must be disposed of to a registered and approved product dealer. This will carry out the statutory discharge and disposal of hydraulic oil, as well as sorting materials for further processing for recycling.
Page 13
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 Part number Description 4,5m 5,4m 6,3m 7,3m 8,2m 630757097 Drawbar 630771023 Drawbar 630757028 Towing eye Ø50 w/swivel - M16 bolte 690141095 Support leg 3500 kg 690141102 Support leg 6000 kg 1030280 Pin for support leg Ø16 L=94 - 45°...
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 Chassis Back to the table of contents...
Page 15
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 Part number Description 4,5m 5,4m 6,3m 7,3m 8,2m 1325038 Chassis 1325264 Chassis 1325373 Chassis, (From serial number 352888) Transport fittings 24”/Ø620 mm 1325225 Transport fittings 24”/Ø620 mm 1325456 (From serial number 352888) 690200050...
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 Wheel frame – center section 4,5 - 5,4m Back to the table of contents...
Page 17
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 Part number Description 4,5m 5,4m Wheel frame - Center section 1325113 (Changed from serial number 352888) 1325115 Wheel frame - Center section with brake hubs 69440765N Pin Ø40 L=765 mm 630532700 Lock bushing for pin head...
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 Wheel frame – center section 6,3 – 7,3 – 8,2m Back to the table of contents...
Page 19
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 Part number Description 6,3m 7,3m 8,2m 1325248 Wheel frame - Center section 1325370 Wheel frame - Center section with brake hubs Wheel frame - Center section with brake hubs 1325421 From serial number 352888 69440810N...
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 Rings at the support bearing Description Support bearing (see page 28) Ring with hub 72 mm (see page 22 - 25) Ring with hub 82 mm (see page 22 - 25) Ring wiht hub 104 (see page 22 - 25) Breaker ring, standard (see page 22 –...
Page 27
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 NOTES: Date: Notes: Back to the table of contents...
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 Roller Support bearing for 8,2 m Vip-Roller NG wing section Optional equipment Back to the table of contents...
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 Spring-Board Back to the table of contents...
Page 31
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 Part number Description 633033020 Spring-Board bar, middle 1325296 Spring-Board bar, middle 1325090 Spring-Board bar, left 1325091 Spring-Board bar, left 1325299 Spring-Board bar, left 1325302 Spring-Board bar, left 1325339 Spring-Board bar, left 1325088...
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 Spring-Board w/fixed mounted wearing points and locking system Part number Description 0422145 Spring-board tine 80x10 mm - long 633052150 2-tine slicing point (crust breaker) 633052100 Flat wearing point 633052200 Clamp for Spring-Board tine 633055710...
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 Ø16 mm tines Pieces in Part number Description each tooth 633055609 Tine Ø16 H=655mm 0235480 Bolt M12x120 mm 8.8 633055612 Clamp 0272820 Washer 0264070 Safety nut M12, fzb DIN985 0272270 Facet washer 12mm fzb, DIN125B Back to the table of contents...
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m 20-08-2019 Pneumatic brakes For mashines w/rubbber hose for the pneumatic cylinder Back to the table of contents...