Table of Contents
Advertisement
UK
After 10 hours of operation, tightening of wheels, bearings and stop rings must be done. If this is
not respected our warranty will lapse.
Maximum torque according to ISO 898-1 in Nm. With lubricated thread
Metric thread
M10x1,5
M12x1,75
M14x2,0
M16x2,0
M18x2,5
M20x2,5
M22x2,5
M24x3,0
• On foldable models the cylinder bushings and hinge joints must be greased at every 20 hour
of operating
• Bearings at the rollers twice a year and after every machine wash.
Eventually damages at the paint must be repaired at least once in the season. This will preserve
and make the machine stay in a good condition for many years.
When, after many years of use, the machine is to be regarded as end-of-life, it must be disposed of
to a registered and approved product dealer. This will carry out the statutory discharge and disposal
of hydraulic oil, as well as sorting materials for further processing for recycling.
Front-Roller 3,0m foldable
Maintenance
Quality 8.8
38
66
105
164
233
331
450
572
Disposal
8
Quality 10.9
54
95
150
235
323
458
622
791
Back to the table of contents
06-10-2021
Quality 12.9
63
110
176
274
377
535
727
925
Advertisement
Table of Contents
