Activate Device Via Client Software; Activate Device Via Web - HIKVISION DS-KD9203 Series User Manual

Video Intercom Face Recognition Door Station User Manual
4. After selection, press # to finish activation.

5.2 Activate Device via Client Software

You can only configure and operate the door station after creating a password for the device
activation.
Default parameters of door station are as follows:
Default IP Address: 192.0.0.65.
●
Default Port No.: 8000.
●
Default User Name: admin.
●
Steps
1. Run the client software, click Maintenance and Management → Device Management → Device
to enter the page.
2. Click Online Device.
3. Select an inactivated device and click Activate.
4. Create a password, and confirm the password.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can better protect your product.
5. Click OK to activate the device.
Note
When the device is not activated, the basic operation and remote operation of device cannot
●
be performed.
You can hold the Ctrl or Shift key to select multiple devices in the online devices, and click the
●
Activate button to activate devices in batch.

5.3 Activate Device via Web

You are required to activate the device first by setting a strong password for it before you can use
the device.
Default parameters of the door station are as follows:
Default IP Address: 192.0.0.65.
●
Default Port No.: 8000.
●
Default User Name: admin
●
15