HIKVISION DS-KD9203 Series User Manual page 36

Video Intercom Face Recognition Door Station User Manual
Reboot: Click Reboot to reboot the device.
●
Restore
●
Click Restore to reset all the parameters, except the IP parameters and user information, to
the default settings.
Default
Click Default to restore all parameters to default settings.
Export parameters:
●
1. Select Device Parameters, and click Export to pop up the dialog box.
2. Set and confirm the encryption password.
3. Click OK to export parameters.
Import Config. File:
●
1. Click browse icon to select the configuration file.
2. Click Import and enter the encryption password to import.
Upgrade: Click browse icon to select the upgrade file.
●
Note
The upgrading process will last 1 to 10 minutes, do not power off during the upgrading. The
device reboots automatically after upgrading.
Authentication
Click Security → Authentication to enter the settings page. On the page, you can select RTSP
Authenticationaccording to your actual needs.
Click Save to enable the settings.
Security Service
Click Security → Security Service to enter the settings page. On the page, you can enable SSH
according to your actual needs.
Click Save to enable the settings.
User Management
Click User Management to enter the settings page.
Administrator can edit the permission for the users.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum of
8 characters, including at least three kinds of following categories: upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. And we
recommend you change your password regularly, especially in the high security system, changing
the password monthly or weekly can better protect your product.
Online Users
Click User Management → Online Users to enter the page.
25