HIKVISION DS-KD9203 Series User Manual page 39

Video Intercom Face Recognition Door Station User Manual
2. Set the ports of the device.
HTTP Port
The default port number is 80, and it can be changed to any port No. which is not occupied.
HTTPS Port
The default port number is 443, and it can be changed to any port No. which is not occupied.
RTSP Port
The default port number is 554.
Server Port
The default server port number is 8000, and it can be changed to any port No. ranges from
2000 to 65535.
3. Click Save to enable the settings.
SNMP Settings
Before You Start
Before setting the SNMP, please download the SNMP software and manage to receive the camera
information via SNMP port. By setting the Trap Address, the camera can send the alarm event and
exception messages to the security center.
Steps
1. Click Network → Advanced → SNMP to enter the settings page.
2. Check the checkbox of Enable SNMPv1, Enable SNMP v2c to enable the feature correspondingly.
1) Edit Read SNMP Community and Write SNMP Community.
2) Enter the Trap Address, Trap Port and Trap Community.
Figure 7-5 Port Settings
28