Access Control Settings - HIKVISION DS-KD9203 Series User Manual

Video Intercom Face Recognition Door Station User Manual
Linked Network Settings
Steps
1. Go to Intercom → Session Settings to enter the settings page.
2. Set Register Number and Registration Password.
3. Set Main Station IP and VideoIntercom Server IP.
4. Enable Protocol 1.0.
5. Click Save to enable the settings.
Time Parameters
Go to Intercom → Time Parameters to enter the page.
Configure Max. Call Duration, Max. Message Duration, Max. Ring Duration, and click Save.
Note
Max. call duration between the module indoor station and client ranges from 90 s to 120 s. The
●
call will end automatically when the actual calling duration is longer than the configured one.
Max. message duration ranges from 30 s to 60 s. The message will end automatically when the
●
actual message duration is longer than the configured one.
Max. ring duration refers to the maximum duration of the module indoor station when it is
●
called without being accepted. Max. ring duration ranges from 65 s to 255 s.
Ring-Back Tone Settings
Click Intercom → Ringbacktone Settings to enter the settings page.
Click Add to select the ring tone from PC.
Note
Available Audio Format: WAV、AAC, Size: Less than 600 KB, Sample Rate: 8000Hz, Mono.

7.4.7 Access Control Settings

Permission Password
Steps
1. Click Access Control → Permission Password to enter the settings page.
40