Add Residents - HIKVISION DS-KD9203 Series User Manual

Video Intercom Face Recognition Door Station User Manual
Door Station Settings
Edit the parameters of the door station (including but not limited to, community No., building No.,
floor No., room No. and device mode).
Steps
1. Configure the parameters according to the actual needs.
Note
Outer door station can only edit the Community No., Project No. and No.
●
The No. of the main door station is 0.
●
The No. of sub door stations should be larger than 0 and ranges from 1 to 8.
●
Each unit should add 1 main door station. Up to 8 sub door stations can be added to the main
●
door station.
2. Optional: Enable the Normally Open Mode according to your needs.
The door remains open.
3. Optional: Select the language.
4. After configuration, press * to save and exit.
Recognition with Mask
Steps
1. Enable Face with Mask Detection.
2. Select the Passing Level of Face Mask Recognition.
3. Edit the Fce with Mask & Face 1:N Matching Threshold and Fce with Mask & Face 1:N
Matching Threshold (ECO Mode).

6.1.3 Add Residents

User Management
You can add, edit and delete the informations of the users.
Steps
1. Hold * and # at the same time to enter the authentication page.
2. Authenticate via administrator.
- Authenticate face/card/fingerprint to login.
- Press # to enter the password to login.
3. Switch to User Management according to the tips on the page.
4. Press # to enter the settings page.
18