Video Intercom Face Recognition Door Station User Manual
Note
Terminal NC1/COM1 is set as default for accessing electric bolt. Terminal NO1/COM1 is set as
●
default for accessing electric strike.
To connect electric lock in terminal NO2/COM2/NC2, it is required to set the output of terminal
●
NO2/COM2/NC2 to be electric lock with iVMS-4200 Client Software.
3.2.2 Exit Button Wiring
Wire the BTN1/BTN2 terminal with the door contact.
Here takes BTN1 for example.
3.2.3 Door Contact Wiring
Wire the SEN1/SEN2 terminal with door contact.
Here takes SEN1 for example.
Figure 3-3 Exit Button Wiring
8