System Settings - HIKVISION DS-KD9203 Series User Manual

Video Intercom Face Recognition Door Station User Manual

7.4.1 System Settings

Follow the instructions below to configure the system settings, include System Settings,
Maintenance, Security, and User Management, etc.
Click System to enter the settings page.
Basic Information
Click System Settings → Basic Information to enter the settings page. On the page, you can edit
Device Name and Device No. Set the Language and System Type according to your needs.
Click Save to enable the settings.
Time Settings
Click System Settings → Time Settings to enter the settings page. Select the Time Zone of your
location from the drop-down list.
Enable NTP, set the Server Address, NTP Port and Interval.
●
Enable Manual Time Sync., set the time manually or check the Sync. with computer time.
●
Click Save to enable the settings.
DST
Click System Settings → DST to check Enable DST. Set the parameters according to your needs and
click Save to enable the settings.
Maintenance
Click Maintenance → Upgrade & Maintenance to enter the settings page.
Figure 7-2 Maintenance
24