Multi-Point Lock
FM7300 Series and BL7300 Series
Installation Instructions
4
Optional Installation (cont .)
a
Dogging Indicator Installation (cont .)
• Using a #7 drill bit, drill two (2) holes completely through the door, making sure
the drill remains square to the face of the door. (Figure 30)
• Countersink holes on the opposite face of the door
to fit the supplied oval head screws. (Figure 31)
1-800-727-5477 • www.sargentlock.com
Copyright © 2017, 2019, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole
or in part without the express written permission of SARGENT Manufacturing Company is prohibited.
Figure 30
Figure 31
15
A8220D 10/19