Feed Top Rod Into Door; Align With Lockbody Cassette (Lbc) - Assa Abloy SARGENT BL7300 Series Installation Instructions Manual

Multi-Point Lock
FM7300 Series and BL7300 Series
Installation Instructions
5 Addendum (cont .)
e

Feed Top Rod into Door

• Orient the latch chassis as shown. Rotate the
rod and rod guide so the rod guide tab faces
up. Slide the rod assembly into the door. Make
sure the rod guide remains in the correct
orientation with the guide tab facing up.
(Figure 39)
f

Align with Lockbody Cassette (LBC)

• When approaching the LBC, slightly elevate the rod and slide the guide tab on outer diameter of the
LBC gear. (Figure 40)
• To align the hex of rod with the hex of the LBC gear, fit the rod guide tab into the LBC gear slot. Once
aligned, push the rod assembly in until fully seated. (Figure 41)
1-800-727-5477 • www.sargentlock.com
Copyright © 2017, 2019, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole
or in part without the express written permission of SARGENT Manufacturing Company is prohibited.
Figure 39
LBC
Gear
Figure 40
Figure 41
19
guide tab
Latch chassis holes
to mate with door
face holes.
Rod Guide
A8220D 10/19