Assa Abloy SARGENT BL7300 Series Installation Instructions Manual page 16

Multi-point lock

Hide thumbs Also See for SARGENT BL7300 Series:

Table of Contents

Multi-Point Lock

FM7300 Series and BL7300 Series

Installation Instructions

Optional Installation (cont .)

Dogging Indicator Installation (cont .)

Install the indicator on the inside of the door using supplied 10-24 x 2" oval head screws. Make sure the

control fingers grab the top rod pin as shown. (Figure 32)

Check for proper operation. Rotate the lever until the indicator window shows a single latch point.

(Figure 33)

Note:

To dog the top and bottom latches in a retracted state, fully rotate the lever and move the slider on the

indicator to the left.

1-800-727-5477 • www.sargentlock.com

or in part without the express written permission of SARGENT Manufacturing Company is prohibited.

Control Fingers

Figure 32

Single Latch

3-Latch

Point

Points

Indicator

Window

Figure 33

Side View

A8220D 10/19

Table of Contents

Sargent fm7300 series