Table of Contents
Advertisement
SuperStorage 6029P-E1CR16T User's Manual
Memory Installation
ESD Precautions
Electrostatic Discharge (ESD) can damage electronic com ponents including memory modules.
To avoid damaging your DIMM modules, it is important to handle it very carefully. The following
measures are generally sufficient to protect your equipment from ESD.
Precautions
•
Use a grounded wrist strap designed to prevent static discharge.
•
Handle the memory module by its edges only.
•
Put the memory modules into the antistatic bags when not in use.
•
Check the Supermicro website for recommended memory modules
Introduction to Intel® Optane DC Persistent Memory
Intel® 82xx/62xx/52xx/4215 supports new DCPMM (Optane™ DC Persistent Memory
Modules) technology. DCPMM offers data persistence with higher capacity at lower latencies
than the existing memory modules and provides hyper-speed storage capability for high
performance computing platforms with flexible configuration options.
Memory Support
The X11DPH-T can have up to 4 TB of Registered DIMM (RDIMM), Load Reduced DIMM
(LRDIMM), 3D LRDIMM, Non-Volatile DIMM (NV-DIMM) ECC DDR4-2933/2666/2400/2133
memory modules installed in 16 slots. The black DIMM slots are reserved for future NVDIMM
support. Populating the DIMM slots in a 2DPC (two DIMMs per channel) configuration with
pairs of memory modules of the same type, speed and size will result in interleaved memory,
which improves performance.
Note: 2933 MHz memory is supported by the 82xx/62xx series processors only.
33
Advertisement
Table of Contents
