Table of Contents
Advertisement
Appendix C: System Specifications
Appendix C
System Specifications
Processors
Dual Intel® Xeon® 81xx/61xx/51xx/41xx/31xx and 82xx/62xx/52xx/42xx/32xx series processors in a Socket P type socket
Note: Please refer to the motherboard specifications pages on our website for updates to supported processors.
Chipset
Intel C622 chipset
BIOS
256 Mb AMI® Flash ROM
Memory
Sixteen DIMM slots support up to 4 TB of Registered DIMM (RDIMM), Load Reduced DIMM (LRDIMM), 3D LRDIMM or Non-
Volatile DIMM (NV-DIMM) DDR4-2933/2666 MHz speed ECC memory
Note: See the memory section in Chapter 3 for details and our website for updates to supported memory.
SATA Controller
On-chip (Intel C622) controller
Drive Bays
Supports up to 12 hot-swap 3.5" hard drives
PCI Expansion Slots
Four PCI-Express 3.0 x8 slots supported by CPU1 (Slots 1, 3, 6, 7)
Three PCI-Express 3.0 x16 slots supported by CPU2 (Slots 2, 4, 5)
Motherboard
X11DPH-T; E-ATX form factor (W x L) 13" x 12" (330 mm x 305 mm)
Chassis
SC829HE1C4-R1K62LPB; 2U Rackmount, (WxHxD) 17.2 x 3.5 x 25.5 in. (437 x 89 x 647-mm)
System Cooling
Three 8-cm counter-rotating hot-swap fans, space for two optional additional fans available
Power Supply
Redundant 1600W power supply modules (PWS-1K62A-1R)
AC Input Voltages: 100-240 VAC
Rated Input Current: 100-127V: 15-12A, 200-240V: 8.5-7A
Rated Input Frequency: 50-60 Hz
Rated Output Power: 1600W
Rated Output Voltages: +12V (83A max. for 100-127A, 100A max. for 200-240A), +5Vsb (4A max.)
Operating Environment
Operating Temperature: 10º to 35º C (50º to 95º F)
Non-operating Temperature: -40º to 60º C (-40º to 140º F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
135
Advertisement
Table of Contents
