Table of Contents
Advertisement
Figure 3-9. Expansion and Riser Cards—Rear View
Installing PCI Expansion Cards
1. Power down the system and remove the top chassis cover.
2. Remove the Ultra riser bracket or WIO riser bracket by flipping up its riser cage release
tab as pictured in Figure 3-10.
3. Insert the expansion card(s) into the riser card slot(s).
4. Replace the riser card into the serverboard expansion slot while aligning the bracket into
the chassis. Flip down the riser cage release tab.
5. Replace the chassis cover.
Chapter 3: Maintenance and Component Installation
Ultra Riser Bracket
Ultra Riser Cage
Release Tab
Figure 3-10. Riser Cage Release Tabs
48
WIO Riser Bracket
WIO Riser Cage
Release Tab
Advertisement
Table of Contents
