Supermicro SuperStorage 6029P-E1CR16T User Manual page 63

I C Bus for VRM
2
Jumpers JVRM1 and JVRM2 allow the VRM SMB clock and data to access the Baseboard
Management Controller (BMC).
Management Engine (ME) Recovery
Use jumper JPME1 to select ME Firmware Recovery mode, which will limit resource allocation
for essential system operations only in order to maintain normal power operation and
management. In the single operation mode, online upgrades will be available via Recovery
mode.
Manufacturing Mode Select
Close JPME2 to bypass SPI flash security and force the system to use Manufacturing Mode,
which will allow you to flash the system firmware from a host server to modify system settings.
JVRM1 (VRM SMB Clock to BMC)
Jumper Settings
Jumper Setting Definition
Closed Enable (SMB Clock to BMC)
Open Disable (SMB Clock to PCH)
JVRM2 (VRM SMB Data to BMC)
Jumper Settings
Jumper Setting Definition
Closed Enable (SMB Data to BMC)
Open Disable (SMB Data to PCH)
Manufacturer Mode
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal
Pins 2-3 ME Recovery
Manufacturing Mode Select
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacturing Mode
63
Chapter 4: Motherboard Connections