Table of Contents
Advertisement
SuperStorage 6029P-E1CR16T User's Manual
Rear I/O Ports
See the figure below for the locations and descriptions of the various I/O ports on the rear
of the motherboard.
#
Description
1.
COM1
2.
USB 0 (USB 3.0)
3.
USB 1 (USB 3.0)
4.
IPMI LAN
5.
USB 2 (USB 3.0)
Unit Identifier Switch/UID LED Indicator
A Unit Identifier (UID) switch (UID) and a UID LED Indicator (LE1) are located on the I/O
back panel. When you press the UID switch, the UID LED indicator will be turned on. Press
the UID switch again to turn off the LED. The UID Indicator provides easy identification of a
system unit that may be in need of service.
Note: UID can also be triggered via IPMI on the motherboard. For more information on IPMI,
please refer to the IPMI User's Guide posted on our website at http://www.supermicro.com.
UID Switch
Pin Definitions
Pin#
Definition
1
Ground
2
Ground
3
Button In
4
Button In
4
6
1
3
5
2
Figure 4-2. Rear I/O Ports
Rear I/O Ports
60
7
8
9
#
Description
6.
USB 3 (USB 3.0)
7.
10G LAN1 Port
8.
10G LAN2 Port
9.
VGA Port
10.
Unit Identifier Switch (UID)
UID LED
Pin Definitions
Color
Status
Blue: On
Unit Identified
10
Advertisement
Table of Contents
