Table of Contents
Advertisement
SuperStorage 6029P-E1CR16T User's Manual
3.3 Motherboard Components
Processor and Heatsink Installation
Follow the procedures in this section to install a processor (CPU) and heatsink to the
motherboard.
Notes:
•
The motherboard should be installed into the chassis first and the processor should be
installed into the CPU socket before you install a CPU heatsink.
•
If you bought a CPU separately, make sure that you use an Intel-certified multi-directional
heatsink only.
•
When receiving a motherboard without a processor pre-installed, make sure that the plastic
CPU socket cap is in place and none of the socket pins are bent; otherwise, contact your
retailer immediately.
•
Refer to the Supermicro website for updates on CPU support.
The Xeon Scalable Processor
The Intel Xeon Dual Intel® Xeon® 81xx/61xx/51xx/41xx/31xx and 82xx/62xx/52xx/42xx/32xx
series processors comes in two models: Fabric (F Model) and Non-Fabric (Non-F Model).
Only the Non-Fabric Model is supported for this system.
Note: All graphics, drawings, and pictures shown in this manual are for illustration only. The
components that came with your server may or may not look exactly the same as those
shown in this manual.
Figure 3-2. Xeon Scalable Processors
27
Advertisement
Table of Contents
