Table of Contents
Advertisement
Chapter 6: BIOS
SNC
Select Enable to use the feature of "Secure Network Communications" (SNC), which
supports full SNC (2-cluster) interleave and 1-way IMC interleave. Select Auto for 1-cluster
or 2-cluster support depending on the satuts of IMC (Integrated Memory Controller)
Interleaving. The options are Disable, Enable, and Auto.
XPT Prefetch
Select Enable to support XPT Prefetching to enhance system performance. The options
are Enable and Disable.
KTI Prefetch
Select Enable to support KTI Prefetching to enhance system performance. The options
are Enable and Disable.
Local/Remote Threshold
Use this feature to configure the threshold settings for local and remote systems that are
connected in the network. The options are Disable, Auto, Low, Medium, and High.
Stale AtoS (A to S)
Select Enable to remove the contents and the structures of the files that are no longer
needed in the remote host server but are still in use by the local client machine from
Directory A to Directory S in the NFS (Network File System) to optimize system performance.
The options are Disable, Enable, and Auto.
LLC Dead Line Alloc
Select Enable to opportunistically fill the deadlines in LLC. The options are Enable, Disable,
and Auto.
Isoc Mode
Select Enable to enable Isochronous support to meet QoS (Quality of Service) requirements.
This feature is especially important for Virtualization Technology. The options are Disable,
Enable, and Auto.
Memory Configuration
Enforce POR
Select POR to enforce POR restrictions for DDR4 memory frequency and voltage
programming. The options are POR and Disable.
Memory Frequency
Use this feature to set the maximum memory frequency for onboard memory modules. The
options are Auto, 1866, 2000, 2133, 2200, 2400, 2600, and 2666.
79
Advertisement
Table of Contents
