Adding Pci Expansion Cards - Supermicro SuperStorage 6029P-E1CR16T User Manual

SuperStorage 6029P-E1CR16T User's Manual

Adding PCI Expansion Cards

Riser cards on chassis brackets allow you to add PCI expansion cards. The total number of
expansion cards depends on the model (see "PCI Expansion Slots" in Section 1.3 and the
table below). All expansion cards are PCI-Express 3.0. For all models:
•
RSC-R2UW-4E8 supports four standard size PCI-E x8 expansion cards (5-8).
•
RSC-R1UW-E8R supports one low profile x8 expansion card (4)
Other configurations are affected by the Ultra riser card.
Full height = 4.2", Low profile = 2.5", Full length = 10.5", Half length = 6.6"
* This slot supports only Supermicro SAS Cards listed below.
Part Number Description
AOC-S3008L-L8e
Std LP, 8 internal ports, 12 Gb/s per port, Gen 3, 122HDD, HBA
(8-port HBA)
AOC-S3008L-L8i
Std LP, 8 internal ports, 12 Gb/s per port, Gen 3, 63HDD, RAID 0, 1, 1E
(8-port SW RAID)
AOC-S3108L-H8iR
Std LP, 8 internal ports, 12 Gb/s per port, Gen 3, 240HDD, RAID 0, 1, 5, 6, 10, 50 ,60
(8-port HW RAID)
1
3
Figure 3-8. PCI Expansion Card Chassis Slots
Expansion Card Configurations
Slot Mechanical
1 Double Width, full height, full length
2 Double Width, full height, full length
3* Internal Low Profile, half length
4 Low Profile, half length
5 Full Height, full length
6 Full Height, full length
7 Full Height, full length
8 Full Height, full length
Supermicro SAS Cards
2
4
Electrical
NA
x8 (CPU1)
x8 (CPU1)
x8 (CPU2)
x8 (CPU2)
x8 (CPU2)
x8 (CPU2)
x8 (CPU2)
47
5
6
7
8