Table of Contents
Advertisement
ESC & y c1 c2 [x1 d1... d(y ´ ´ ´ ´ x1)]...[xk d1... d(y ´ ´ ´ ´ xk)]
[Name]
Define user-defined characters
[Format]
ASCII
Hex
Decimal
[Range]
y = 1
32 £ c1 £ c2 £ 126
0 £ x £ 6 (5 ´ 7 font)
0 £ x £ 10 (7 ´ 7 font)
0 £ d1...dy ´ xk £ 255
k = c2 - c1 + 1
[Description] Defines user-defined characters for the specified character code.
ù y specifies the number of bytes in the vertical direction.
ù c1 specifies the beginning character code for the definition, and c2 specifies the final
code.
ù The allowable character code range is from decimal code 32 to 126.
ù x specifies the number of dots in the horizontal direction.
ù d is the dot data for the characters. The dot pattern is in the horizontal direction from the
left side. Any remaining dots on the right side are blank.
ù After user-defined characters are defined, they remain effective until: another
[Notes]
definition is made, a user-defined bit image is defined, ESC @ is executed, the printer
is reset, or the power is turned off.
ù When value of y , c1 , c2 , or x is out of the range, this command is ignored, and the
following data is processed as normal data.
ù In 7 ´ 7 font, horizontally adjacent dots cannot be printed. Define the character so that
it does not include horizontally adjacent dots.
[Default]
The same pattern as the internal character set.
[Reference]
ESC %
EPSON
ESC &
y
c1
1B
26 y
c1
38 y
c1
27
TITLE
TM-U295/U295P
Specification
(STANDARD)
[x1 d1...d(y ´ x1)]...[xk d1...d(y ´ xk)]
c2
[x1 d1...d(y ´ x1)]...[xk d1...d(y ´ xk)]
c2
[x1 d1...d(y ´ x1)]...[xk d1...d(y ´ xk)]
c2
SHEET
REVISION
F
NO.
NEXT
SHEET
43
42
Advertisement
Table of Contents
