Table 5-2 Troubleshooting The Controller - Will Burt POSITIONIT MM233TX2TXRX2 Operator's Manual

I P
OSITION T OSITIONERS
P
Symptoms
Cannot Access the Controller Menu
The operator cannot
access the controller
menu.
Stuck in Controller Menu
While in menu functions,
the operator cannot exit
a menu.
The Controller Display is Off
The controller display is
off.
5-2

Table 5-2 Troubleshooting the Controller

Possible Cause
The controller is not
receiving power and the
display screen is off.
The [Menu] button does
not respond as quickly as
other buttons.
The method to exit
individual menus varies.
The system is not
receiving power.
The power supply is
wrong.
The system wiring is
incorrect.
The controller is faulty.
Remedy
Power on the system.
Check the schematics (Section
7).
Hold the [Menu] button down for
at least (2) seconds.
Move the joystick to the left to
back out of the menu.
Press the [Prev] button to back
out of the menu.
Look for an <Exit menu> option.
Select that option.
Disconnect and reconnect power
to the controller.
Check the schematics (Section
7).
Check the schematics (Section
7).
Check the schematics (Section
7).
Contact the factory.
October 2023
PM-01011-A