Speed Sensor; H1F Speed Sensor Position; H1F Target Ring - Danfoss H1F 080 Service Manual

Service Manual
H1F Bent Axis Fixed Displacement Motors, Size 080
Operation

Speed sensor

16 | © Danfoss | December 2023
The speed sensor is designed for rugged outdoor, mobile or heavy industrial speed sensing applications.
The detection of the speed is contactless and does not need any calibration or adjustments.
For more information, see Speed and Temperature Sensor, Technical Information, BC152886482203.

H1F speed sensor position

Sensor position in cartridge housing
Cartridge housing

H1F Target Ring

Speed (target) rings vary according to the diameter of the cylinder block or shaft on which they are
installed. The number of teeth is shown in the table below.
The number of speed (target) ring teeth
H1F size
Teeth
080
78
AX465363259664en-000102