Relay Output Page - Kongsberg EK80 Reference Manual

Kongsberg EK80 Reference Manual

Relay Output page

The EK80 system allows you to export the same sensor data that was originally imported.
This can "reuse" the same information on other systems. The page is used to
Relay Output
set up and control this export functionality.
Prerequisites
The dialog box is not available when your EK80 system is set to Inactive mode.
Output
How to open
This page is located in the dialog box.
Output
The dialog box is located on the menu.
Output Operation
Description
The information imported to the EK80 system from
various sensors can also be useful for other systems
on board your vessel. The EK80 system allows
you to "re-export" this sensor information. When
activated, the selected sensor information is sent out
on the chosen communication port (serial or LAN).
The following sensor data can be exported:
• Navigation
• Motion sensor
• Temperature
Once an output type has been defined, it is listed
in the box on the left side of the
Installed Outputs
page. To remove or edit an output type, select it in
the box. Select to change the
Installed Outputs Edit
settings. Select to delete the output.
Remove
Note
In this context, the phrase "sensor" is used to describe an external device providing
information. This information is useful or essential for the operation of the EK80
system. Typical sensors are those providing navigational information (heading, speed or
geographical position) or vessel movements in the sea (motion sensors).
656
395234/J