Relay Output Page - Kongsberg Simrad CS90 Reference Manual

Simrad CS90 Reference Manual
TPP (Tracked Target Position)
Simrad TPP is a proprietary datagram format created by Kongsberg
Maritime. It exports the horizontal range, bearing and depth of a tracked
target. All data are related to the tracked target.
Add
Select to allow export of the chosen data format. Once an output type has been
Add
defined, it is listed in the
data recording, open the
simply select the red circle on the right side of the button.
Remove
Once an output type has been defined, it is listed in the
the left side of the page. To remove the output, select the relevant format in the
Installed Outputs
Edit
Once an output type has been defined, it is listed in the
the left side of the page. To edit the settings of a specific output, select it in the
Installed Outputs
Save
Once you have finished editing the output settings, select
Related topics
Exporting sensor data, marker positions and technical information, page 171
Functions and dialog boxes, page 388
Operation menu; Functions and dialog boxes, page 401
Output dialog box, page 408

Relay Output page

The CS90 system allows you to export the same sensor data that was originally imported.
This can "reuse" the same information on other systems. The
to set up and control this export functionality.
Prerequisites
The dialog box is not available when your CS90 system is set to Inactive mode.
Output
How to open
This page is located in the
the menu.
Operation
490
Installed Outputs
Record Processed
box, and then select
box, and then select
dialog box. The
Output
box on the left side of the page. To start
button, and select On. Alternatively,
Installed Outputs
.
Remove
Installed Outputs
.
Edit
Save
Relay Output
dialog box is located on
Output
box on
box on
to keep the changes.
page is used
442700/A