Table of Contents
Advertisement
Maintenance manual
11.23
1.
Ensure power supply to the motor controller is switched off.
2.
Locate the defect relay.
3.
Loosen all connection wires [1].
4.
Loosen screws [2] on start relay.
5.
Renew relay.
6.
Refit wires and screws.
7.
Turn on power supply.
KONGSBERG PROPRIETARY. This document and its accompanying elements contain KONGSBERG
information which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited if not
otherwise explicitly agreed with KONGSBERG in writing. Any authorized reproduction, in whole or in part, must
include this legend. ©2022 KONGSBERG - All rights reserved.
Replacement of Start Relay
P a g e
52 |
66
Advertisement
Table of Contents
