Kongsberg EK80 Reference Manual page 713

Kongsberg EK80 Reference Manual
• With disabled, the priority list is not used. Information is imported from the
Auto
sensor at the top of the list. All other sensors are ignored.
Configuration
On most of the pages you
can specify a manual value.
Use this function if a sensor is
unserviceable or not installed. Click to enable this function, and select or type the
requested value.
Special features:
Time
When you select the Time sensor, you can set the ZDA datagram to synchronize
the internal clock in the Processing Unit. Acceptable time deviation is
configurable. To do this, you need administrative privileges on your Processing
Unit.
Temperature
When you select the Temperature sensor, you will notice that radio buttons
replace the checkbox for some transducers. These enable you to select manual
temperature, or a supported transceiver/transducer as the source for temperature
measurements. This choice is permitted because selected transducers offer
temperature measurements. When choosing the suitable transceiver, a
drop-down list with channels supporting these transducer-induced temperature
measurements appears.
Distance
Set the VLW datagram for vessel's distance sailed. The distance is displayed in
the top bar. To reset the distance use the reset function.
Related topics
Interfacing peripheral equipment, page 285
Functions and dialog boxes, page 539
Setup menu: functions and dialog boxes, page 577
Installation dialog box, page 585
Sensor Installation page, page 705
Sensors page, page 789
712
395234/J