Relay Output Page - Kongsberg Simrad CS90 Reference Manual

Hide thumbs Also See for Simrad CS90:

Table of Contents

Simrad CS90 Reference Manual

TPP (Tracked Target Position)

Simrad TPP is a proprietary datagram format created by Kongsberg Maritime. It

exports the horizontal range, bearing and depth of a tracked target. All data are

related to the tracked target.

to allow export of the chosen data format. Once an output type has been

defined, it is listed in the

data recording, open the

select the red circle on the right side of the button.

Once an output type has been defined, it is listed in the

left side of the page. To remove the output, select the relevant format in the

box, and then select

Once an output type has been defined, it is listed in the

left side of the page. To edit the settings of a specific output, select it in the

box, and then select

Once you have finished editing the output settings, select

Relay Output page

The CS90 system allows you to export the same sensor data that was originally imported.

This can "reuse" the same information on other systems. The

set up and control this export functionality.

Prerequisites

dialog box is not available when your CS90 system is set to Inactive mode.

This page is located in the

Installed Outputs

Record Processed

dialog box. The

box on the left side of the page. To start

button, and select On. Alternatively, simply

Installed Outputs

to keep the changes.

Relay Output

dialog box is located on the

page is used to