Calculation Interval Dialog Box - Kongsberg EK80 Reference Manual

Note
Velocity measurement calibration is always done using previously recorded raw data. It
is very important that you choose the correct channel for calibration as the calibration
process differs greatly between velocity measurements and target strength measurements.
The velocity measurement channels are by default named ADCP.
Calibration Wizard
The
Calibration Wizard
process.
1 The first page in the
process, or return to a previous process by reusing saved data.
2 The second page in the
calibrated. It is very important that you choose the correct channel for calibration
as the calibration process differs greatly between velocity measurements and target
strength measurements.
3 The third page, and the following pages, in the
different calibration processes related to velocity or target strength measurements.
Related topics
Setup menu: functions and dialog boxes, page 577
Functions and dialog boxes, page 539

Calculation Interval dialog box

The
Calculation Interval
and the size distribution. You can base the calculations on sailed distance, elapsed time, or
a number of pings.
How to open
The
Calculation Interval
• The page is opened in the
• The dialog box is opened using the
The parameters are the same, it does not matter if you use the page or the dialog box.
395234/J
offers a set of dialog boxes to guide you through the calibration
Calibration Wizard
Calibration Wizard
settings define the parameters that are used to calculate the biomass
parameters can accessed from two places in the user interface.
Information Pane Options
Calculation Interval
Functions and dialog boxes
allows you to either start a new calibration
allows you to select the channel to be
Calibration Wizard
dialog box.
button on the
are specific for the
menu.
Setup
581