Protective End Cap Of Output Cable And Using Description; Types Of Protective End Caps And Factory Status - Raycus RFL-C30000M-CE User Manual

3.3 Protective End Cap of Output Cable and Using Description

3.3.1

Types of Protective End Caps and Factory Status

For multi-module high-power fiber lasers, the output cable type used is QP output optical cable.
There are two types of protective end caps in the machine, as shown in the Figure 5.
Type A end cap: It is assembled on the output optical cable when it leaves the factory. The end cap is
equipped with a protective window to ensure the cleanliness of the end cap (or crystal) during
transportation.
Type B end cap: It is attached to the packaging accessories and is generally packed in a lamination
box. The end cap is not equipped with a protective window, which is used to prevent the end cap from
being damaged when the optical cable is loaded with the cutting head (or welding head).
Table 3 Instructions for the use of protective end caps for output optical cables
Type
RFL-C30000M-CE
Note: According to the difference of the protective end cap of the cable in the actual use of the customer,
some models need to replace the protective end cap. Please refer to the " Cleaning Instructions for the Output
Optical Cable Before Installation " to clean the output optical cable and the protective end cap.
CAUTION:
(1) In the process of installation and disassembly, please handle the laser output head
gently, and avoid vibration;
(2) Before assembling the laser output head, ensure that the optical lens and cutting
head cavity are clean and free of pollution.
Optical cable type
QP
Factory end cap type
Type A end cap
(with protective
windows )
14
Use end cap type
Type B end cap
(without protective window )