Introduction; Markings; Warnings; Information Notes - KEB COMBIVERT G6 Instructions For Use Manual

1 | Introduction

1 Introduction
1.1 Markings
1.1.1 Warnings
DANGER
WARNING
CAUTION
NOTICE
1.1.2 Information notes
4
The described devices, accessories, hardware and/or software are products of
KEB Automation KG. The enclosed documents correspond to conditions valid at
printing. Misprint, mistakes and technical changes reserved.
Certain operations can cause hazards during the installation, operation or there-
after. There are safety informations in the documentation in front of these opera-
tions.
Warnings contain signal words for the severity of the hazard, the type and/or
source of the hazard, the consequence of non-compliance and the measures to
avoid or reduce the hazard.
Type and/or source of the hazard.
Leads to death or serious bodily injury if not observed.
a) Measures to avoid the hazard.
b) Can be supplemented by an additional danger sign or pictogram.
Type and/or source of the hazard.
May cause death or serious injury if not observed.
a) Measures to avoid the hazard.
b) Can be supplemented by an additional danger sign or pictogram.
Type and/or source of the hazard.
May cause bodily injury if not observed.
a) Measures to avoid the hazard.
b) Can be supplemented by an additional danger sign or pictogram.
Type and/or source of the hazard.
Can cause damage to property if not observed.
a) Measures to avoid the hazard.
b) Can be supplemented by an additional danger sign or pictogram.
Indicates to the user a special condition, prerequisite, scope or simplifica-
tion.
This is a reference to further documentation with barcode
for smartphones and link for online users.
https://www.keb.co.uk/nc/search
KEB Automation KG
ma_dr_g6-modbus-20332669_en