Eaton SPC Max Series Installation Instructions Manual page 38

Instruction Booklet IB158002EN
Effective September 2023
Power Xpert SPD Modbus register map, continued
Register Name
12268 Clear General Log Events
12269 Phase A Total Surge Counts
12271 Phase B Total Surge Counts
12273 Phase C Total Surge Counts
12275 DCI for Testing Display
12276 Ethernet MAC Address
Appendix G
Web user error codes
Error message
Login Failed (Login Page)
One Admin Role is mandatory in System
User Self-Deletion Not Permitted
Username Already Exists
User Database Full
Password Security Violation
Password Matches With Name or Existing Password
New password cannot match old password
User Locked Temporarily
HTTP Version Not Supported
Failed to Fetch
Codepack integrity check has failed
Codepack integrity check has aborted firmware update
Final integrity check is invalid
38
EATON www.eaton.com
Attributes
BOOL RW NV
Default: 0
Range: 0 to 1
UINT32 RO
Default: 0
Range: 0 to 999999
UINT32 RO
Default: 0
Range: 0 to 999999
UINT32 RO
Default: 0
Range: 0 to 999999
BOOL RW
Default: 0
Range: 0 to 1
UINT8 RO NV
Array size: 6
Description
User not authorized to access device
Username already exists on the device
Username and password match
Too many users trying to access device
Device communication failed (login page), device communication failure
(firmware update page)
Image in the codepack file is corrupt
Displayed when any one image is corrupt during multiple firmware update
Multiple reasons
SPC Max Series surge protective device
Description
Clear general event logs 1. Default value is zero 2. Writing 1 to the register will clear the general logs.
Sum of phase A high, medium and low surge counts
Sum of phase B high, medium and low surge counts
Sum of phase C high, medium and low surge counts
DCI test display, LED and alarm. Setting the value starts the display test, once the display test is
complete the value will be updated to zero by the firmware.
Unique MAC address assigned to this device (MAE)
Array of 3 registers
MAC_ADDRESS()
Installation instructions for
Action required
Contact administrator for authorization
Contact administrator to delete user
Create unique username
Create unique username and password
Reinstall firmware
Reinstall firmware