Eaton SPC Max Series Installation Instructions Manual page 36

Instruction Booklet IB158002EN
Effective September 2023
Power Xpert SPD Modbus register map, continued
Register Name
8207 Medium Surge Event Phase Indicator
8957 Medium Surge Event Log Index
8958 High Surge Event Time Stamp
10958 High Surge Event Phase Indicator
11458 High Surge Event Log Index
11459 Clear Surge Log Events
11460 Clear Surge Counts
11461 Indicates Power Xpert SPD System
faults
11463 Total Low Surge Counts
11465 Total Medium Surge Counts
11467 Total High Surge Counts
11469 Sum of Surge Counts of All Phases
11476 Power Xpert SPD Firmware Version
ASCII
11479 Date Code
11483 Catalog Number
11497 Indicates the status of N-G Green LED BOOL RO
11498 Indicates the status of N-G Yellow LED BOOL RO
11499 Indicates the status of N-G Red LED
36
EATON www.eaton.com
Attributes
UINT8 RO
Array size: 1500
Default: 0
Enum
UINT16 RO
Default: 0
Range: 0 to 1500
UINT32 RO
Array size: 1000
Default: 0
UINT8 RO
Array size: 1000
Default: 0
Enum
UINT16 RO
Default: 0
Range: 0 to 1000
BOOL RW NV
Default: 0
Range: 0 to 1
BOOL RW NV
Default: 0
Range: 0 to 1
DWORD RO
Default: 0
Bitfield
UINT32 RO
Default: 0
Range: 0 to 999999
UINT32 RO
Default: 0
Range: 0 to 999999
UINT32 RO
Default: 0
Range: 0 to 999999
UINT32 RO
Default: 0
Range: 0 to 999999
STRING8 RO
Array size: 6
STRING8 RO NV
Array size: 7
STRING8 RO NV
Array size: 20
Default: 0
Default: 0
BOOL RO
Default: 0
SPC Max Series surge protective device
Description
Indicates in which the phase, medium surge event occurred
Value Description
1 Phase A medium surge event log
2 Phase B medium surge event log
3 Phase C medium surge event log
Index points to the latest medium surge event log
Stores the timestamp of high surge event. Timestamp will be stored in epoch time
Array of 2000 registers
Indicates in which the phase, medium surge event occurred
Value Description
1 Phase A high surge event log
2 Phase B high surge event log
3 Phase C high surge event log
Index points to the latest high surge event log
Clear the high, medium and low surge event logs in phase A, B and C 1. Default value is zero 2.
Writing 1 to the register will clear the surge logs.
Clear the high, medium and low surge counts in phase A, B and C 1. Default value is zero 2.
Writng 1 to the register will clear the surge counts.
Power Xpert SPD system fault indication to user
Bit Description
0 No faults
1 Error in logging data to FRAM
2 NV memory checksum error
Indicates total low surges occurred. This will be sum of phase A, phase B and phase C low surge counts.
Indicates total medium surges occurred. This will be sum of phase A, phase B and phase C medium
surge counts.
Indicates total high surges occurred. This will be sum of phase A, phase B and phase C high surge
counts.
Indicates the total surge counts. This will be sum of low, medium and high surges.
Power Xpert SPD firmware in the format of major & minor
Array of 3 registers
Date code as determined by test station, format : "yymmdd" (MAE)
Array of 4 registers
Catalog number assigned to the product (MAE)
Array of 10 registers
Indicates the status of N-G green LED, 0:LED off 1:LED on. Indicates protection status on N-G.
Indicates the status of N-G yellow LED, 0:LED off 1:LED on. Indicates protection status on N-G.
Indicates the status of N-G red LED, 0:LED off 1:LED on. Indicates protection status on N-G.
Installation instructions for
Coil
n/a
n/a
n/a