Eaton SPC Max Series Installation Instructions Manual page 34

Surge protective device
Hide thumbs Also See for SPC Max Series:
Table of Contents

Advertisement

Instruction Booklet IB158002EN
Effective September 2023
Appendix F
Power Xpert SPD Modbus register map
Register
Name
1
Product Serial Number
3
Vendor Name
14
Vendor URL
37
Style Number
42
Assigned Name
53
Firmware Revision
60
PCB Serial Number
77
Method of IP Allocation
78
Current Method of IP Allocation
79
Present Ethernet IP Address
81
Present Ethernet Subnet Mask
83
Present Ethernet Default Gateway
85
Stored Ethernet IP Address
87
Stored Ethernet Subnet Mask
89
Stored Ethernet Default Gateway
98
Multicast Enable Disable (00000010)
100
Broadcast Enable Disable (0)
102
Modbus TCP Com Timeout (0)
34
EATON www.eaton.com
Attributes
UINT32 RO NV
STRING8 RO
Array size: 12
STRING8 RO
Array size: 14
STRING8 RO NV
Array size: 10
STRING8 RW NV
Array size: 21
Default: "SPDLAB1"
STRING8 RO
Array size: 14
STRING8 RO NV
Array size: 14
UINT8 RW NV
Default: 0
Enum
UINT8 RO
Range: 0 to 3
UINT8 RO
Array size: 4
Units: IP
UINT8 RO
Array size: 4
Units: IP
UINT8 RO
Array size: 4
Units: IP
UINT8 RW NV
Array size: 4
Default: 0xFE, 0x01, 0xA8, 0xC0
Units: IP
UINT8 RW NV
Array size: 4
Default: 0x00, 0xFF, 0xFF, 0xFF
Units: IP
UINT8 RW NV
Array size: 4
Default: 0x01, 0x01, 0xA8, 0xC0
Units: IP
UINT32 RW NV
Default: 0x00000010
UINT32 RW NV
UINT16 RW NV
Default: 0
Units: milliseconds
SPC Max Series surge protective device
Description
32-bit device serial number (MAE)
Product vendor name character string
Array of 6 registers
Product vendor URL
Array of 7 registers
Product style number (MAE)
Array of 5 registers
User assigned name
Array of 11 registers
Firmware revision
Array of 7 registers
Product hardware revision numerical (MAE)
Array of 7 registers
Allows to set the method used to allocate an IP address: 0 - restore (hardcoded 192.168.1.254).
1 - DHCP. 2 -full address taken from NV memory
Value
Description
0
Statically hardcoded
1
DHCP allocated
2
Taken from NV
Shows the present method used to allocate an IP address: 0 - restore (hardcoded 192.168.1.254).
1 - DHCP. 2 - full address taken from NV memory
The active IP address being used on the network
Array of 2 registers
IPV4_BIG_ENDIAN_U8()
The active subnet mask IP address being used on the network
Array of 2 registers
IPV4_BIG_ENDIAN_U8()
The active default gateway IP address being used on the network
Array of 2 registers
IPV4_BIG_ENDIAN_U8()
The IP address used in the NV address select configuration
Array of 2 registers
IPV4_BIG_ENDIAN_U8()
The IP subnet mask used in the NV address select configuration
Array of 2 registers
IPV4_BIG_ENDIAN_U8()
The IP default gateway used in the NV address select configuration
Array of 2 registers
IPV4_BIG_ENDIAN_U8()
Multicast settings: Value : Description 0x00000010: Multicast Enable 0x00000000: Multicast Disable
with Filter PerfectFilter 0x00000004: Multicast Disable with Filter HashTable 0x00000404: Multicast
Disable with Filter_PerfectHashTable
Broadcast Enable Disable settings: 0x00000000: BroadcastFramesReception_
Enable 0x00000020: BroadcastFramesReception_Disable
Communication timeout for Modbus TCP. 0 = disable
Installation instructions for

Advertisement

Table of Contents
loading

Table of Contents