Table of Contents
Advertisement
Quick Links
Instruction Booklet IB158007EN
Installation instructions for Eaton SPC series
surge protective device (SPD)
Contents
Description
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2 SPC series catalog number . . . . . . . . . . . . . . . . 3
3 SPC series product nameplate . . . . . . . . . . . . . . 3
4 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5 Wiring diagrams . . . . . . . . . . . . . . . . . . . . . . . . . 6
6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
7 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
8 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
9 Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
10 Ordering guidelines . . . . . . . . . . . . . . . . . . . . . 9
12 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Rev. 1
Page
Advertisement
Table of Contents
Related Manuals for Eaton SPC Series
Summary of Contents for Eaton SPC Series
-
Page 1: Table Of Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 SPC series catalog number . . . . . . . . . . . . . . . . 3 3 SPC series product nameplate . -
Page 2: Effective September 2016 Rev
INSTALLING A PROTECTION DEVICE WHICH IS UNDER RATED FOR THE protective device . ELECTRICAL SYSTEM VOLTAGE CAN CREATE A POTENTIALLY HAZARDOUS Eaton’s Type 2 SPC is intended for installation on the load side of the CONDITION. service equipment overcurrent device . Including branch panel loca- tions and functions to protect sensitive electronic equipment from CHECK THE FACILITY’S GROUNDING SYSTEM. -
Page 3: Spc Series Catalog Number
3 SPC series product nameplate 1 . Verify that the area is clear of any dirt, debris or clutter that may Each Eaton SPC series unit has a nameplate affixed to the side of hamper the installation process . the unit that identifies the catalog number and operating parameters . - Page 4 Instruction Booklet IB158007EN Installation instructions for Eaton SPC series surge protective device (SPD) Effective September 2016 4.2 Panel mounted 4.4 Enclosure mounting feet The preferred mounting of the SPC is directly to the electrical panel The mounting feet attach to the bottom of the enclosure with the with its integrated male connector hub and the supplied ¾”...
- Page 5 . These relay con- tacts are rated: 2A at 30Vdc or 250Vac Refer to Table 2 – SPC Series Form C Wire Color Codes for color codes of relay wires (shown in the energized state) . otee: Utilization of Form C contacts is optional .
-
Page 6: Wiring Diagrams
Instruction Booklet IB158007EN Installation instructions for Eaton SPC series surge protective device (SPD) Effective September 2016 5. Wiring diagrams Table 3. SPC Series Phase Wire Color Code PHASE WIRE COLOR CODE PHASE WIRE COLOR L1 (Phase A) Black L2 (Phase B) -
Page 7: Operation
SPC . The audible alarm and Form C relay are tied to the Phase LED’s located on the SPC Series enclosure’s lid . If protection to one or more phases is lost the following will occur: Single, Split and 3 Phase devices - if all voltage is lost to the SPC •... -
Page 8: Maintenance
THE INFORMATION, RECOMMENDATIONS AND DESCRIPTIONS CONTAINED HEREIN. In no event will Eaton be responsible to the purchaser or user in con- tract, in tort (including negligence), strict liability or otherwise for any special, indirect, incidental or consequential damage or loss what-... -
Page 9: Ordering Guidelines
Instruction Booklet IB158007EN Installation instructions for Eaton SPC series surge protective device (SPD) Effective September 2016 10 Ordering guidelines SPC 200 208Y 8 P Series Voltage Code kA Rating Options Options 120N – 120V Single Phase (2W +G) 050kA per Phase 240N –... -
Page 10: Warranty
.eaton .com/spc and click on the warranty regis- tration icon . Eaton assumes no risk or liability for results of the use of the prod- uct purchased, including but not limiting the generality of the forego-... - Page 11 Instruction Booklet IB158007EN Installation instructions for Eaton SPC series surge protective device (SPD) Effective September 2016 Notese: EATON www.eaton.com...
- Page 12 All Rights Reserved information contained in this document may change without notice . Eaton’s Technical Resource Center Eaton shall not be liable for errors contained herein or for incidental or consequential dam- Publication No. IB158007EN ages in connection with the furnishing, perfor- mance, or use of this material .
Need help?
Do you have a question about the SPC Series and is the answer not in the manual?
Questions and answers