Ordering Guidelines - Eaton SPC Max Series Installation Instructions Manual

Installation instructions for
SPC Max Series surge protective device

Ordering guidelines

Table 8. Eaton SPD Max Series
Series
SPM
240S = 120/240 split-phase
kA rating
208Y = 120/208 wye (4W+G)
100 = 100 kA per phase
220Y = 127/220 wye (4W+G)
120 = 120 kA per phase
400Y = 230/400 wye (4W+G)
160 = 160 kA per phase
480Y = 277/480 wye (4W+G)
200 = 200 kA per phase
600Y = 347/600 wye (4W+G)
250 = 250 kA per phase
240D = 240 delta (3W+G)
300 = 300 kA per phase
480D = 480 delta (3W+G)
320 = 320 kA per phase
600D = 600 delta (3W+G)
400 = 400 kA per phase
240H = 240 delta high-leg
600 = 600 kA per phase
800 = 800 kA per phase
230L = 230 single-phase
a Please consult the factory for 240 delta high-leg (4W+G) applications with high leg on 'C' phase.
b Available in Power Xpert SPD NEMA 1 enclosure.
Example: SPD250480D3R = SPD Max Series, 250 kA per phase, 480D voltage, Standard with Surge Counter feature package,
NEMA 4 enclosure with internal circuit breaker .
SPM 250 480D 3 R
Voltage code options a
1 = Basic
Dual colored LED per phase to indicate protection status
Dual colored LED to indicate protection status of the N-G mode on units
with a neutral wire
3 = Standard with Surge Counter
Dual colored LED to indicate protection status of the N-G mode on units
with a neutral wire
Audible alarm with silence button
Form 'C' Relay contact
EMI/RFI filtering providing up to 50 dB of noise attenuation from 10 kHz to 100 MHz
Surge counter with alarm silence (reset) button
(4W+G) on 'B' phase
Dual colored LED per phase to indicate protection status
4 = Power Xpert SPD
Tri colored LED per phase to indicate protection status
Tri colored LED to indicate protection status of the N-G mode on units
with a neutral wire
Audible alarm and push any button to silence
Form 'C' relay contact
Local display with LCD 20x4 character display
Ethernet Modbus TCP/IP and BACnet/IP
Time/date stamped surge events on phases A, B and C
Instruction Booklet IB158002EN
Feature package options
Effective September 2023
Application suffix
R = 1 brick, NEMA 4 enclosure
with internal circuit breaker
S = 2 brick, NEMA 4 enclosure
with internal circuit breaker
T = 1 brick, NEMA 4 enclosure
with internal terminal block
U = 2 brick, NEMA 4 enclosure
with internal terminal block
V = 1 brick, NEMA 4X enclosure
with internal circuit breaker
W = 2 brick, NEMA 4X enclosure
with internal circuit breaker
X = 1 brick, NEMA 4X enclosure
with internal terminal block
Y = 2 brick, NEMA 4X enclosure
with internal terminal block
EATON www.eaton.com
b
b
23