4 Installer instructions
Icon
Description
The outdoor temperature sensor is connected.
Boiler number in cascade system.
The solar calorifier is on and its heat level is displayed.
Burner output level (1 to 5 bars, with each bar representing 20% output).
The pump is running.
Three-way valve indicator.
Display of the system water pressure.
Chimney sweep mode is enabled (forced full load or low load for O
Energy-saving mode is enabled.
DHW boost is enabled.
Timer program is enabled: The room temperature is controlled by a timer program.
Manual mode is enabled: The room temperature is set to a fixed setting.
Temporary overwrite of the timer program is enabled: The room temperature is changed temporarily.
The holiday program (including frost protection) is active: The room temperature is reduced during your holiday to
save energy.
Frost protection is enabled: Protect the boiler and installation from freezing in winter.
Service notification: service needed.
Installer contact details are displayed or can be filled in.
Tab.6
Icons - On/off
Icon
Description
CH operation is enabled.
DHW operation is enabled.
The burner is on.
Bluetooth enabled and connected (icon is non-trans
parent).
Heating enabled.
Cooling enabled.
Heating/cooling enabled.
Tab.7
Icons - Zones
Icon
Description
All zones (groups) icon.
Living room icon.
Kitchen icon.
Bedroom icon.
Study icon.
Cellar icon.
4
Installer instructions
4.1
Accessing the user level menus
8
measurement).
2
Icon
Description
CH operation is disabled.
DHW operation is disabled.
The burner is off.
Bluetooth enabled and disconnected (icon is trans
parent).
Heating/cooling disabled.
The tiles on the home screen provide quick access for the user to the
corresponding menus.
7703943 - v.06 - 13122021