Requirements On The Flue Gas Discharge System; Classification - REMEHA Gas 320 Ace Installation And User Manual

4.5

Requirements on the flue gas discharge system

4.5.1

Classification

Tab.5 Type of flue system: B
Principle
AD-3001055-01
(1) The material must also satisfy the material property requirements from the relevant chapter.
Tab.6 Type of flue system: C
Principle
AD-3001057-01
(1) The material must also satisfy the material property requirements from the relevant chapter.
7734324 - v.07 - 21092022
- B
23 23P
Description
Room-ventilated version.
Without down-draught diverter.
Flue gas discharge via the roof.
Air supply from the installation area.
The air inlet connection of the boiler must stay open.
The installation area must be vented to ensure sufficient air
supply. The vents must not be obstructed or shut off.
The IP rating of the boiler is lowered to IP20.
33
Description
Room-sealed version.
Flue gas discharge via the roof.
The air inlet is in the same pressure zone as the flue (e.g. a
concentric roof terminal).
Important
The installer is responsible ensuring that the right type of flue
system is used and that the diameter and length are correct.
Always use connection materials, roof terminal and/or horizontal
flue terminal supplied by the same manufacturer. Consult the
manufacturer for compatibility details.
The use of flue systems from other manufacturers is allowed in
addition to the recommended manufacturers listed in this
manual. Use is only allowed when all our requirements are met
and the description of flue system C
4 Before installation
is respected.
63
Recommended manufactur­
ers
(1)
Connection material and roof
terminal:
Alukan
Cox Geelen
Muelink & Grol
Recommended manufactur­
ers
(1)
Roof terminal and connection
material
Remeha, combined with con­
nection material from Muelink
& Grol
Remeha 350/350, in combi­
nation with connection mate­
rial from Alukan (Only for
Remeha Gas 620 Ace)
Cox Geelen
Muelink & Grol
15