Table of Contents
Advertisement
11 User instructions
Fig.103
Weekday
A
11:20
...
.....
.... ......
.... ...... ....
................
..:..
........
....
B
..:..
........
....
C
....... ...........
..... ... ....... ....
........ .......
11.6
Reading the installer's name and phone number
11.7
Shut-down
11.8
Frost protection
80
3. Select the timer program you want to modify: Schedule 1, Schedule 2
4. Select the weekday you want to modify.
A Weekday
B Overview of scheduled activities
C List of actions
..............
5. You can perform the following actions:
AD-3001384-01
The installer can set his name and phone number in the control panel. You
can read this information when you want to contact the installer.
1. Press the
2. Select System Settings
3. Select Installer Details.
Shut-down the boiler as follows:
1. Turn off the boiler using the on/off switch.
2. Shut off the gas supply.
3. Keep the installation frost-free.
Set the temperature control low, for example to 10°C.
If the temperature of the central heating water in the boiler drops too low,
the built-in boiler protection system is activated. This system works as
follows:
If the water temperature is lower than 7°C, the pump switches on.
If the water temperature is lower than 4°C, the boiler switches on.
or Schedule 3.
Activities scheduled for Monday are displayed. The last scheduled
activity of a day is active until the first activity of the next day. At
initial start-up, all weekdays have two standard activities; Home
starting at 6:00 and Sleep starting at 22:00.
5.1. Select scheduled activity to edit the time this activity will start,
change the temperature or to delete the selected activity.
5.2. Add time and Activity to add a new activity to the scheduled
activities.
5.3. Copy to other day to copy the scheduled activities of the
weekday to other days.
The activities including the configured time and temperature
will be copied to the selected days.
5.4. Set activity temperatures to change the temperature.
> System Settings > Installer Details
Use the rotary knob to navigate.
Use the
button to confirm your selection.
button.
The installer's name and phone number is shown.
Do not shut-down the boiler if the installation can't be kept frost-free.
Caution
Drain the boiler and central heating system if you are not going
to use your home or the building for a long time and there is a
chance of frost.
The frost protection does not work if the boiler is out of
operation.
The built-in boiler protection is only activated for the boiler and
not for the system and radiators.
Open the valves of all the radiators connected to the system.
7734324 - v.07 - 21092022
Advertisement
Table of Contents
