Do Not Disturb (Dnd) - Tadiran Telecom T42G/S User Manual

User Guide for the SIP-T42G IP Phone
To place a call on hold:
1. Press the Hold soft key during a call.
The line key LED flashes green. The LCD screen indicates that the call is on hold.
Note
The phone will beep softly every 30 seconds to remind you that you still have a call on
hold.
To resume a held call:
1. Press the Resume soft key.
Multiple Calls on Hold:
If multiple calls are placed on hold, do one of the following:
- Press
to retrieve the desired call.
- Press the corresponding line key to retrieve the call.
If more than one call is placed on hold, a numbered prompt appears on the LCD screen,
for example "2/3", indicating that this is the second call out of three calls.

Do Not Disturb (DND)

You can use DND to reject incoming calls automatically on the phone. The prompt
message "n New Missed Call(s)" ("n" indicates the number of missed calls) will appear
on the LCD screen, and callers will receive a busy message. All calls you receive while
DND is enabled are logged to your missed calls list.
Note
The prompt message will display only if Missed Call Log for the line is enabled. For
additional details on DND and call routing, please refer to
for End Users
.
Do not disturb is local to the phone, and may be overridden by the server settings. For
more information, contact your system administrator.
You can enable/disable DND for the phone system, or you can customize DND for each
or all accounts. Two DND modes:
Phone (default): DND is effective for the phone system.

Custom: DND can be configured for each or all accounts

You can receive incoming calls from authorized numbers when DND is enabled.
24
or to switch between the calls, and then press the Resume soft key
Aeonix Configuration Guide