Registration - Tadiran Telecom T42G/S User Manual

->Network->WAN Port.
2. Press
3. Press
4. Enter the desired values in the IPv4, Subnet Mask, Default Gateway, IPv4 Pri.DNS
and IPv4 Sec.DNS fields respectively.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
To configure a static IPv6 address via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin)
->Network->WAN Port.
2. Press
3. Press
4. Enter the desired values in the IPv6 IP , Prefix, Default Gateway, IPv6 Pri.DNS and IPv6
Sec.DNS fields respectively.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
Wrong network settings may result in inaccessibility of your phone and may also have an
impact on your network performance. For more information on these parameters,
contact your system administrator.

Registration

Generally, your phone will be deployed with multiple other phones. In this case, your
system administrator will configure the phone parameters beforehand, so that after you
start up your phone, the phone will be registered and ready for use. If your phone is not
registered, you may have to register it. Contact your system administrator for details on
registering your phone.
to select IPv4 and then press the Enter soft key.
to select Static IP Client and then press the Enter soft key.
to select IPv6 and then press the Enter soft key.
to select Static IP and then press the Enter soft key.
Getting Started
13