Installing The Batteries; Using The Remote Control; Connections; Connecting To Tv Set - Strong SRT 8100 User Manual

PART 1 • English
27. COLOR KEYS (RED/GREEN/YELLOW/BLUE):

2.5 Installing the Batteries

Remove the battery cover from the remote control and put 2XAAA size batteries inside the compartment.
The diagram inside the battery compartment shows the correct way to install the batteries.
Note: The batteries should not be recharged, disassembled, electrically short-circuited, be mixed or used with other
types of batteries.

2.6 Using the Remote Control

To use the remote control, point it towards the front of the digital receiver. The remote control has a range of up to 7
metres from the receiver at an angle of up to 60 degrees.
The remote control will not operate if its path is blocked.
Note: Sunlight or very bright light will decrease the sensitivity of the remote control.

3.0 CONNECTIONS

3.1 Connecting to TV Set

3.2 Connecting to Digital Audio Amplifier, DVD/Video recorder

4.0 FIRST TIME INSTALLATION

After all connections have been made properly, switch on TV and make sure the receiver is connected to the main power.
Then switch on the receiver. If you are using the receiver for the first time or restored to factory default, the Installation
Guide menu will appear on your TV screen. Use pq buttons to choose menu item.
1. OSD Language. Use tu buttons to select the language of your preference.
2. Country. Use tu buttons to select your country of residence
3. Antenna Power. Use tu buttons to set ON/OFF. Set to ON only if you use active indoor or outdoor
antenna. If it is set to ON the receiver will supply 5V power to the antenna. Please refer to the user manual
of your antenna.
4. Channel Type. Use tu buttons to select FTA/ALL. If you set FTA, the receiver will install only Free-To-Air
channels. If you set ALL, the receiver will install all available channels available in broadcast.
5. Select Search Channel and press u or OK to start Auto Scan.
The receiver will indicate progress of tuning. Once channel tuning is completed, the receiver will tune to the first
channel in the list. You are ready to watch TV.

5.0 BASIC OPERATIONS

5.1 Program

Press MENU and select Program using tu buttons. Press OK or 6 button to edit program settings. Press EXIT to exit
the menu.
To operate different functions in menu screens or in teletext
Fig. 4
Fig. 5
Fig. 6
Fig. 6
5