REMOTE CONTROL SETTINGS (OPTIONAL)
OUTPUT
CONFIGURATION
REDIRECTION OF
PINCH ZONE
GENERAL
SERVICE MODE
Page 10 of 12
R1
NO
R2
NC
R1
teach-in
see page 6
Service mode deactivates the safety detection for 15 minutes and can be useful
during an installation, a mechanical teach-in of the window, or maintenance work.
To enter service mode, press the red button for at least 3 seconds. The LED will be
OFF when the sensor is in service mode.
To exit service mode, press again for at least 3 seconds.
Service mode will automatically deactivate when a teach-in is launched.
NC
NC
NO
NO
NC
NO
NO DETECTION
R2
R1+R2
teach-in
teach-in
virtual push
free shape
buttons
see page 6
see page 6
75.0050.01 LZR-FLATSCAN W 20230908
NO = normally open
NC = normally closed
NO
NO POWER
DETECTION
Note: Green LED for setting #1 only.
full reset
partial reset
factory reset
factory reset of
of all values
all values except
field dimensions
& output
configurations
NC