BEA LZR-FLATSCAN W Manual page 12

FOR ALL APPLICATIONS:
BEA, INC. INSTALLATION/SERVICE COMPLIANCE EXPECTATIONS
The installation is provided by CUSTOMER or its affi liates. BEA is not affi liated with CUSTOMER or any of its affi liates. BEA has no liability
to CUSTOMER or the end user for any and all liability, claims, demands, obligations, actions, losses, costs, damages, fees or expenses
(including attorneys' fees and legal costs) arising out of or in connection with product installation, or the end user's use of or inability
to use the product, the installation services, product defects or malfunctions, including, but not limited to, any actual or alleged injury,
damage, death or other consequence occurring to any person or property as a result, directly or indirectly, of installation, possession,
or use of any product or services provided by CUSTOMER or any individual or entity acting for or on behalf of CUSTOMER, whether
claimed by reason of breach of warranty, negligence, product defect or otherwise, and regardless of the form in which any such claim is
made (collectively, the "Released Matters"). You, on behalf of yourself and each of the Releasor Parties, hereby releases and absolutely
and irrevocably discharges each Hippo Party and their respective offi cers, directors, employees, representatives and agents from and
against any Released Matters. You acknowledge and agree that the foregoing is a full and fi nal release of all Released Matters, including
those that are unknown, unanticipated or unsuspected or that may hereafter arise as a result of the discovery of new and/or additional
facts, and you expressly waive all rights under Section 1542 of the Civil Code of California as well as any similar statutes of any other
jurisdictions, which you acknowledge you have read and understood and which provides as follows: A GENERAL RELEASE DOES NOT
EXTEND TO CLAIMS WHICH THE CREDITOR DOES NOT KNOW OR SUSPECT TO EXIST IN HIS FAVOR AT THE TIME OF EXECUTING THE
RELEASE, WHICH IF KNOWN BY HIM MUST HAVE MATERIALLY AFFECTED HIS SETTLEMENT WITH THE DEBTOR.
FOR DOOR, WINDOW, OR GATE APPLICATIONS:
BEA, INC. INSTALLATION/SERVICE COMPLIANCE EXPECTATIONS
BEA, Inc., the sensor manufacturer, cannot be held responsible for incorrect installations or incorrect adjustments of the sensor/device;
therefore, BEA, Inc. does not guarantee any use of the sensor/device outside of its intended purpose.
BEA, Inc. strongly recommends that installation and service technicians be AAADM-certifi ed for pedestrian doors, IDA-certifi ed for doors/
gates, and factory-trained for the type of door/gate system.
Installers and service personnel are responsible for executing a risk assessment following each installation/service performed, ensuring
that the sensor/device system performance is compliant with local, national, and international regulations, codes, and standards.
Once installation or service work is complete, a safety inspection of the door/gate shall be performed per the door/gate manufacturer's
recommendations and/or per AAADM/ANSI/DASMA guidelines (where applicable) for best industry practices. Safety inspections must
be performed during each service call – examples of these safety inspections can be found on an AAADM safety information label (e.g.
ANSI/DASMA 102, ANSI/DASMA 107, UL294, UL325, and International Building Code).
Verify that all appropriate industry signage, warning labels, and placards are in place.
General Tech Questions: techservices-us@BEAsensors.com | Tech Docs: www.BEAsensors.com
Page 12 of 12
Tech Support & Customer Service: 1-800-523-2462
75.0050.01 LZR-FLATSCAN W 20230908