Getting Started; Attaching The Connection Cable For The Operating Display; Attaching The Connection Cable For Ethernet; Connecting The Power Supply Unit To The Device - Sartorius Cubis MCA Series Operating Instructions Manual

Getting Started

1
2
1
1
48 Operating Instructions Cubis
6 Getting Started
6.1 Attaching the Connection Cable for the
Operating Display
Procedure
Insert the connection cable for the operating display into the recess in
t
the rear side of the device (2).
Plug the connection cable for the operating display into the "Operating
t
display connection" (1) and screw tightly by hand.
6.2 Attaching the Connection Cable for
Ethernet
Procedure
Remove the operating display from the device.
t
Remove the cover for the Ethernet connection from the operating
t
display.
Connect the Ethernet connection cable to the Ethernet connection (1).
t
Plug the other end of the Ethernet connection cable into the Ethernet
t
connection at the installation site.
6.3 Connecting the Power Supply Unit
to the Device
Procedure
Plug the power supply cable into the power supply unit connection.
t
Connect the connection cable from the power supply unit to the "Power
t
supply" connection (1) on the back of the device.
| MCA Models
®